PTP T25/T28 Turbo Blanket - Lava

The T25 / T28 Lava Turbo Blanket is designed to fit the T25 or T28 turbochargers without interfering with the actuator arm.

PTP Turbo Blankets isolate the heat produced by your turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging vital under hood components (up to 60% under hood heat reduction), and giving a boost in horsepower.

In keeping the exhaust gases within the turbocharger hot, turbocharger efficiency is improved. Also by keeping the heat of the exhaust gases contained within the hot side of the turbocharger and away from the cool side of the turbocharger and the intake path, more oxygen per unit volume reaches the engine, and thus, more power can be achieved.

The PTP Lava Turbo Blankets are constructed with an outer layer made from pulverized volcanic lava rock (Rated 1800°F Direct Heat / 2500°F Radiant Heat) formed into fabric and woven into a tight mesh weave, these turbo blankets are internally insulated with high temperature calcium magnesium silicate wool (Rated 1832°F Continuous / 2300°F Peak) overlaid with a high temperature stainless steel mesh for increased durability and improved thermal resistance. The Lava Turbo Blankets are designed to withstand the harshest of conditions.

Every PTP Turbo Blanket is hand-crafted in North America, and quality is guaranteed. PTP Turbo Blankets is well known in the heat insulation industry for its high standards for material selection, design, and construction. Our materials are on the cutting edge of heat insulation technology. With the growing amount of imitation turbo blankets on the market, it's important to note many of them are manufactured using inferior materials for construction. Imitation turbo blankets can be ineffective, or worse, they can be dangerous if flammable materials are used.

WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.