Rear Engine Reseal Kit (Subaru)
Rear Engine Re-Seal Kit for most Subaru's
If you are doing a clutch and flywheel installation, we recommend re-sealing the back side of the motor while you have access. If you are a low mileage car this may not be necessary, but for most applications, it is good peace of mind.
This kit includes everything you need to reseal the whole back side of the motor, which you have access to during that installation. The parts are also available individually below the kit.
- 806786040 - Rear Main Seal
- 11831AA210 - Rear Access Panel
- 800406140 (x5) - Access Panel Screws
- 800406150 - Access Panel Locking Screw
- 806931070 - Driver's Side O-Ring
This kit is applicable to most turbo Subaru's. If you are unsure if this kit includes the parts you need, simply give us a call at 303-402-5142 with the last 8 digits of your VIN number. We can then check Subaru's system to make sure you are getting the right parts!
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.
Need Help with this product?
Chat with our staff using our Live Chat, Call us at 303.402.5142 or Email us email@example.com
Products ship within 2 days.
Friendly return policy because our priority is making sure you have the right product.