RCM Modified Oil Pump - 10mm

$277.12
SKU
SEN13

At the heart of all Roger Clark Motorsport engine’s is the now world renowned RCMS Modified oil pump.

This clever, effective modification has been designed to assist the Impreza with it’s oil supply and is now regarded as a must have modification with any Impreza engine build. Each pump is carefully checked, given a serial number and then modified to incorporate a different pressure relief valve ensuring greater reliability and peace of mind to your Impreza engine.

Please note that flow rate remains unchanged.

Our oil pumps are supplied with a replacement front crank oil seal and oil gallery, black sealing o-ring. It is also recommended that you use 3 bond sealer (SGA35) to seal the oil pump to the block assembly.

TECHNICAL SPECIFICATIONS

  • Modified with a billet, super finish, nitrided replacement plunger.
  • 10mm Internal drive rotor.
  • Serial numbered.
  • Primed with oil prior to dispatch.

FEATURES

  • Improved reliability.
  • Carefully Inspected and primed with oil prior to dispatch.

 

 

5 4

OIL PUMP BUYERS GUIDE

CAN'T GET YOUT OIL TO PRIME?

OIL PUMPS, OIL PRESSURE, SHIMMING SUBARU OIL PUMPS

Model Fitment Confirmation
EJ205 ✓
EJ207 ✓
EJ255 ✓
EJ257 ✓
[ NOTE ] We recommend either our 11mm or 12mm Modified Oil Pump for vehicles registered after 2007. (See part numbers SEN1065 & SEN1066)

 


WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.

More Information
SKU SEN13
Brand Roger Clark Motorsport
More from Roger Clark Motorsport