IAG Stage 2 EJ25 Short Block

The IAG Stage 2 Short Block is designed for modified EJ25 Subaru's that need a beefed-up performance short block. The IAG Stage 2 short block builds off the Stage 1's strengths by adding IAG Spec H-Beam forged connecting rods. The upgraded rods and bearings are able to support additional engine load produced by larger turbochargers that the OEM STI rods cannot support reliably. Each IAG Stage 2 Short Block starts with new Subaru 2.5L 99.5mm stock bore EJ25 engine case halves as standard. The short block is measured and assembled using a new 2017+ Subaru 2.5L nitride treated STI crankshaft that is matched to ACL or King race main bearings. IAG-Spec H-Beam rods and ARP2000 rod bolts are utilized along with ACL or King race rod bearings. The case halves are sealed with new OEM main case bolts and sealant. Finally, IAG-Spec JE 99.5mm Forged Pistons are spec'd and installed finishing off the short block. 

The IAG Stage 2 Short Block has a power output rating of 575BHP.

Weight
125.00 lbs
SKU
IAG-ENG-1202
Weight
125.00 lbs
Our Price: Special Price $3,199.99 Our Price: Regular Price $3,359.99

The IAG Stage 2 Short Block is designed for modified EJ25 Subaru's that need a beefed-up performance short block. The IAG Stage 2 short block builds off the Stage 1's strengths by adding IAG Spec H-Beam forged connecting rods. The upgraded rods and bearings are able to support additional engine load produced by larger turbochargers that the OEM STI rods cannot support reliably. Each IAG Stage 2 Short Block starts with new Subaru 2.5L 99.5mm stock bore EJ25 engine case halves as standard. The short block is measured and assembled using a new 2017+ Subaru 2.5L nitride treated STI crankshaft that is matched to ACL or King race main bearings. IAG-Spec H-Beam rods and ARP2000 rod bolts are utilized along with ACL or King race rod bearings. The case halves are sealed with new OEM main case bolts and sealant. Finally, IAG-Spec JE 99.5mm Forged Pistons are spec'd and installed finishing off the short block. 
Stage 2 Short Block Includes:

  • Case Halves - Brand new Subaru OEM case halves 99.5mm stock bore
  • Pistons - IAG-Spec JE 99.5mm Forged Pistons, Ring Set, .180" Chromoly Pins, Clips, (Perfect Skirt Coating and Offset Wrist Pin)
  • Connecting Rods - IAG-Spec H-Beam Rods with ARP2000 rod bolts
  • Rod / Main Bearings - ACL or King Race Bearings
  • Crankshaft - Standard New Subaru Nitride Treated 2017+ STI Crankshaft
  • Case / Main Bolts - Standard FHI Subaru case bolts

Additional Options Available: 

  • Hardware / Seals - OEM cover and seal kit - $105.99


Power: The IAG Stage 2 Short Block has a power output rating of 575BHP.
*All IAG Short Blocks are balanced and blueprinted. 
Compression Ratio: 8.5:1 on D Cylinder Heads (EJ255) 
Compression Ratio: 8.2:1 on B, V and W EJ257 Heads with standard thickness gasket.

*Build time for blocks are 2-3 weeks. During the holidays it can take longer. 



warning_symbolWARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.

Weight
125.00 lbs
Need Help with this product?

Chat with our staff using our Live Chat, Call us at 303.402.5142 or Email us at

flatironstuning@flatironsimports.com
Fast Shipping

Products ship within 2 days.

Easy Returns

Friendly return policy because our priority is making sure you have the right product.

Safe and Secure Shopping
Copyright © 2019 Flatirons Tuning LLC. All rights reserved.
click here