We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
COBB Big SF Intake System (08-18 Nissan R35 GT-R)
$765.00
SKU
7C1150
Works From Stock to Big Power Builds In stock form, the R35 ECU measures airflow using a Mass Airflow (MAF) sensor located in the stock intake system. As modifications add up and increase power, the airflow can increase to the point that it exceeds the MAF sensor's maximum capacity, preventing the ECU from accurately measuring air mass, and thus unable to deliver the appropriate amount of fuel. The Big SF Intake increases the inner diameter of the intake tubing, increasing the cross section of the intake and allowing the MAF sensor to read lower for the same amount of ingested air. This gives the sensor the necessary headroom to read accurately for airflow higher than the stock system was designed for. COBB Tuning has used the Big SF Intake to support builds of over 600HP and 600TQ at the wheels, gains of 40% over a stock GT-R!
Increased Induction Sound
Enjoy the increased snarl from your engine and hear the turbo spool more clearly with the addition of the COBB Tuning SF Intake system. Turbocharger induction noise and bypass valve venting sound is much more audible using this intake system.
Easy to Install
The COBB Tuning SF Intake was designed to be easy to install without having to modify your car or remove the bumper skin. Installation requires no cutting or trimming or removal of the bumper skin or bumper support and can be completed with simple hand tools. Simply remove the stock airbox and bolt the SF intake into place in just minutes!
Free Off-The-Shelf Calibrations
Changing the calibration of the MAF sensor necessitates tuning changes to recalibrate the ECU. COBB Tuning has you covered here as well with a set of free Accessport Big SF Intake Off-The-Shelf maps for all supported GT-R vehicles. Big SF Intake maps are available for download from the Nissan GT-R Accessport Map Database.
FEATURES
- Mandrel Bent 3.0" Aluminum Tubing
- 3-Ply Steel Reinforced Silicone
- Pre-Oiled, Cleanable, Reusable Custom Filter Element
- No Cutting or Trimming Required
- Powdercoated Wrinkle Black Finish
EMISSIONS
50 State Legal.
This part is legal for sale and use on Emissions Controlled Vehicles in all 50 states when used in accordance with the manufacturer's application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number:
| Year Fitments | Nissan GT-R |
|---|---|
| 2008 | ✓ |
| 2009 | ✓ |
| 2010 | ✓ |
| 2011 | ✓ |
| 2012 | ✓ |
| 2013 | ✓ |
| 2014 | ✓ |
| 2015 | ✓ |
| 2016 | ✓ |
| 2017 | ✓ |
| 2018 | ✓ |
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to P65Warnings
Vehicle Fitment
- 2008 - 2018 Nissan R35 GT-R
WARNING:NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EMISSION CONTROLLED MOTOR VEHICLE.
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.
| SKU | 7C1150 |
|---|---|
| Brand | COBB |
| Product Type | Engine, Intake and Exhaust |
| Engine | Intakes and Intercoolers |
| Intake and Exhaust | Intakes and Intercoolers |
