Advan RG-D2 Wheel

Six years passed since the current RG-D model was launched in 2010. In 2016, this model will receive its first model change, coming out as the RG-D2.

The special aspects of the new casting 1-piece RG-D2 models include the step-rim form. Three types of concave spokes are standard designs for 18x7.5J/8.0J/8.5J, while 18x8.5J/9.0J/9.5J are the GTR design, and 9.5J/10.0J/10.5J/11.0J are the Super GTR design, each with as great a concave design as is possible with casting wheels.

ADVAN Racing FLOW FORMING JAPAN MADE logos are printed on the step of the rims by a thermal-transfer method, so everyone can tell these are ADVAN Racing wheels. The spokes are side cut on both sides, without joins, using the “advanced side cut” process. These 18-inch wheels have the racing rim profile necessary for 18-inch wheels to accommodate brake systems with rotor sizes of up to 400mm diameter.

RG-D2 are available in the following colors: Machining & Racing Hyper Black, Semi Gloss Black, and Machining & Black Gun Metallic which was newly developed.

The six spokes that are a tradition of the RG design have side cut machining in accordance with the latest ADVAN Racing technology trend, and advanced side cut swoops between two spokes with no join.  

WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.