Action Clutch Stage 1 HD Clutch Kit 2OS (15-18 WRX)

$527.81
SKU
ACR-1816-2OS

Action Clutch’s Stage 1 HD (2OS) Kit has been designed for vehicles ranging from stock to basic bolt-on cars. It utilizes our reinforced Steel Backed Copper Kevlar Organic friction material, coupled with a single diaphragm heavy-duty pressure plate with increased clamping force to give you smooth and reliable engagement and higher torque holding capacity. The pedal feel will be heavier than our Stage 1 (1OS) clutch kit by approximately 20%.

100% INCREASED HOLDING CAPACITY OVER FACTORY KIT*
RECOMMENDED FOR HEAVY-DUTY STREET USE AND MILD TRACK-USE

2018+ WRX with VIN starting with J*806877 MUST use Action Clutch AC105FW Flywheel OR an OEM 2015-2017 Flywheel for proper fitment. If you have any questions regarding fitment please reach out!

What’s Included
  • Sprung Organic Disc
  • Dual Clamp Load HD Pressure Plate
  • Pilot Bearing / Bushing (when applicable)
  • Clutch Alignment Tool
  • Conventional Release Bearing

Break-in Requirements
500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable).
Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.

*Increase in holding capacity is rated in Crank Torque, not Wheel Torque

0 0
Year Fitments Subaru WRX
2015
2016
2017
2018

 


WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to P65Warnings

More Information
SKU ACR-1816-2OS
Manufacturer's Part Number ACR-1816-2OS
Brand Action Clutch
More from Action Clutch