Overtake Wheel Spacers - Pair - 3mm - 5x114.3 5x100

The OVERTAKE Subaru Wheel Spacers push each wheel out 3mm, made from 6061 aluminum and drilled for both 5x114.3 and 5x100 so one pair fits Subarus on either bolt pattern. Hub-centric fitment keeps the wheel centered on the factory hub, so there is no wobble or vibration. Slip them over the hub, torque the wheels down, done.

Your wheels are sitting too far inboard, and you know it.

Sold as a pair. Order 2 pairs for full set.

WHAT YOU GET:

• Wheels sitting flush with the fenders instead of buried inside them
• A wider track from pushing each wheel out 3mm per side
• Room to clear bigger brakes or aftermarket calipers
• A cleaner, more intentional stance without touching ride height

FEATURES:

• Drilled for both 5x114.3 and 5x100, so one pair fits Subarus on either bolt pattern
• Slip-on design fits over the factory hub and reuses your existing wheel studs
• Hub-centric design for precise centering and no added vibration
• Chamfered lips on both hub and wheel side for easier installation
• Made from 6061 aluminum with an anodized finish for corrosion resistance
• Laser-etched specs directly on the spacer so you always have the info handy
• Sold as a pair

THE DETAILS:

Subaru uses two different bolt patterns across its lineup depending on the year and model, which normally means buying a spacer made for your specific car. These are drilled for both 5x114.3 and 5x100, so one pair covers either one. OVERTAKE builds them from 6061 aluminum with a hub-centric 56.1mm bore that seats on the factory hub, so the hub handles the centering and the wheel stays balanced. The chamfered hub side guides the spacer on without fighting the install, and the specs are laser-etched into each one so you always know which pair you are holding. At 3mm the result is a flush stance and a little more room for a big brake setup, not a dramatic change in rake. Install is the usual slip-on routine: pull the wheels, seat the spacers on the hubs, remount, and torque to factory spec. Nothing is permanent, so you can pull them any time you change your wheel setup.

WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to P65Warnings