We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
ST Suspension ST XTA Coilovers (13-20 BRZ)
For those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!
PERFORMANCE DRIVING IN MIND
ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.
EASY LOWERING ADJUSTMENT
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.
KW ENGINEERING: EXCLUSIVE FOR ST SUSPENSION
The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protec
LOWERING
- Front Lowering: 0.8" to 2.0"
- Rear Lowering: 0.8" to 2.0"
FEATURES
- 18 Distinct clicks of Rebound Damping Adjustability
- Solid Aluminum uniball top mounts (camber adjustable depending on application)
- Linear Race springs
- Reduced system friction for effective damping adjustment
- Individual lowering within the tested height adjustment range
- Front and rear axle thread adjustment (when possible)
- Galvanized coilover struts with additional coating for optimized corrosion protection
- Complete solution with adjustable spring perch, multi-coated spring system and dynamic elastomer bump stops with dust protection
- Powerful twin-tube dampers with high-quality components for maximum longevity
- Backed by ST suspension's 5 Year Unlimited Mileage Warranty
$1,874.00
SKU
sts18258804
Your car. Your Style. Your Suspension. Choose the right components for your vehicle from one of the largest delivery programs for high-quality suspension products. At ST suspensions, you will get the matching springs, the perfect wheel spacers, level adjusting lift kits, sport suspensions, tailor-made anti-sway bars or coilover kits at an attractive price. The best part: all ST suspension products are manufactured in the well-known high KW-quality.
| Year Fitments | Subaru BRZ |
|---|---|
| 2013 | ✓ |
| 2014 | ✓ |
| 2015 | ✓ |
| 2016 | ✓ |
| 2017 | ✓ |
| 2018 | ✓ |
| 2019 | ✓ |
| 2020 | ✓ |
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to P65Warnings
| SKU | sts18258804 |
|---|---|
| Manufacturer's Part Number | 18258804 |
| Brand | ST Suspension |
| Product Type | Suspension |