Radium PCV Valve AN Fitting (2015+ WRX, 2013+ BRZ)

Intended for use with recirculated AOS kits, or catch cans being vented to the atmosphere, this specially machined aluminum fitting replaces and deletes the stock PCV valve on top of the Subaru FA20, FA20F, FA24D, FA24F, and Toyota 4U-GSE engine blocks. 

This black anodized 6061 aluminum fitting converts the threaded hole in the block to a straight thru 10AN male fitting. The fitting has an overall height of 3.1 inches.

INSTALLATION NOTES

1. Always apply a small amount of PTFE thread sealant before installing. First, hand tighten the fitting. Then, use a 7/8" deep socket wrench to spin the fitting another 1.5 to 3 turns. 

2. This fitting deletes the PCV valve. If connecting this to a catch can that breathes back into the intake manifold, a PCV valve must be installed somewhere in the system to meter the airflow into the intake manifold and prevent any reverse airflow into the crankcase. A PCV valve must be used: a check valve cannot be used in place of a PCV valve

COMPATIBILITY

• 15-21 WRX (FA20F)
• 2022+ WRX (FA24F)
• 14-18 Forester XT (FA20F)
• 12-16 Scion FR-S (FA20)
• 13-20 Subaru BRZ (FA20) 
• 2022+ Subaru BRZ (FA24D) 
• 13-21 Toyota GT86 (4U-GSE)
• 2022+ Toyota GR86 (FA24D)

[ Note ] Universally compatible with 3/8"-19 BSPT threads.