RCM 2-Piece Billet Gudgeon Pin & Oil Separator Cover Kit (EJ20 & EJ25)

The Roger Clark Motorsports Billet Gudgeon Pin Cover & Oil Seperator Cover kit is the perfect addition to any engine build to guard against future oil leaks.

Throughout the years Subaru produced oil separator covers using a variety of materials such as: cast aluminum, plastic and pressed steel. Many of the later designs were manufactured purely as a cost saving exercise and as such later resulted in costly oil leaks which could be spotted making their way out from between the engine block and gearbox bell housing. In extreme cases the escaping oil could be caught up on the clutch plate, resulting in not only a gearbox removal for the repair of the leak, but also a new clutch kit (perhaps long before it would be due).

Features

  • Eliminates engine oil leaks from the rear of the engine block (found commonly on vehicles fitted with a plastic or pressed tin cover).
  • Offers a stronger and more secure fitting thanks to the plate thickness being significantly increased and the addition of counter sunk screws.

 

Weight
3.00 lbs
SKU
RCM2758
Weight
3.00 lbs
Our Price: $172.41

The Roger Clark Motorsports Billet Gudgeon Pin Cover & Oil Seperator Cover kit is the perfect addition to any engine build to guard against future oil leaks.

Throughout the years Subaru produced oil separator covers using a variety of materials such as: cast aluminum, plastic and pressed steel. Many of the later designs were manufactured purely as a cost saving exercise and as such later resulted in costly oil leaks which could be spotted making their way out from between the engine block and gearbox bell housing. In extreme cases the escaping oil could be caught up on the clutch plate, resulting in not only a gearbox removal for the repair of the leak, but also a new clutch kit (perhaps long before it would be due).

Most of us would only like to build an engine once, that's why it is important to consider all the common faults and potential areas of weakness, putting an stop to any before they arise. With this in mind RCM designed their own separator cover. Based around the genuine part (but with a greater material thickness and improved design), as long as you use adequate sealer and the correct, leaks from the rear oil cover can be eliminated for good.

 

Techincal Specifications

  • Machined from a single billet Alloy
  • Supplied with X6 Zinc Coated Alloy Counter Sunk Screws

 

Features

  • Eliminates engine oil leaks from the rear of the engine block (found commonly on vehicles fitted with a plastic or pressed tin cover)
  • Offers a stronger and more secure fitting thanks to the plate thickness being significantly increased and the addition of counter sunk screws

 

Fitment

  • EJ20
  • EJ22
  • EJ25

warning_symbolWARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.

Weight
3.00 lbs
Need Help with this product?

Chat with our staff using our Live Chat, Call us at 303.402.5142 or Email us at

flatironstuning@flatironsimports.com
Fast Shipping

Products ship within 2 days.

Easy Returns

Friendly return policy because our priority is making sure you have the right product.

Safe and Secure Shopping
Copyright © 2019 Flatirons Tuning LLC. All rights reserved.
click here