Radium Top Feed Fuel Rail Upgrade Kit (Subaru)

Vehicle Fitment:

  • 2002-2014 WRX
  • 207-2018 STI
  • 2007-2012 Legacy GT
  • 2007-2012 Outback XT
  • 2006-2013 Forester XT
Weight
5.00 lbs
SKU
20-0167-0
Weight
5.00 lbs
Special Price $208.95 Regular Price $219.95

Each rail features a large internal diameter bore to suit even the most fuel hungry engines. They are CNC machined from solid 6061 aluminum, black anodized, and laser etched for a high quality surface finish. All 3 ports on each fuel rail are tapped with -8AN ORB.

For thermal insulation, machined phenolic spacers and washers are included to completely isolate the fuel rail from heat transfer via the TGV housings and mounting bolts.

Two sets of these press-fit phenolic spacers (8 total) and matching hardware are included to suit different height fuel injectors. All must use 11mm diameter upper O-rings just like the OEM Subaru top feed injectors. The fuel rail kits are compatible with all fuel types including popular alcohol mixtures such as E85.

20-0167-02 INCLUDES:

  • Black Anodized Laser Etched Aluminum Fuel Rails (x2)
  • Phenolic Thermal Insulating Press-In Spacers, 27mm (x4)
  • Phenolic Thermal Insulating Press-In Spacers, 15mm (x4)
  • Phenolic Thermal Insulating Press-In Bolt Washers (x4)
  • Stainless Steel M8x1.25 Mounting Bolts, Long (x4)
  • Stainless Steel M8x1.25 Mounting Bolts, Short (x4)

20-0167-01 INCLUDES:

  • Black Anodized Laser Etched Aluminum Fuel Rails (x2)
  • Phenolic Thermal Insulating Press-In Spacers, 27mm (x4)
  • Phenolic Thermal Insulating Press-In Spacers, 15mm (x4)
  • Phenolic Thermal Insulating Press-In Bolt Washers (x4)
  • Stainless Steel M8x1.25 Mounting Bolts, Long (x4)
  • Stainless Steel M8x1.25 Mounting Bolts, Short (x4)
  • Black Anodized Aluminum 6AN Male Fittings (x4)
  • Black Anodized Aluminum 8AN ORB Plugs (x4)

The 20-0167-01 kit includes enough to plumb the rails in "Parallel, Flow-Through" or "Series". Refer to the More Details tab above for more information. If -8AN male fittings are required, they can be purchased here 14-0152. Two of the plugs can be used if the fuel rails will be plumbed in "Parallel, Dead End", as shown. The other two plugs can be used for the lower center ports if a fuel pulse damper is not used.

NOTE: Neither fuel rail kit comes with hoses.

Do I need a pulse damper? The opening and closing of the injectors creates pressure pulses in the fuel rail, which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a pulse damper should be used (especially with high flow injectors). The internal diaphragm will absorb oscillating pulses and stabilize fuel pressure. This correction can be measured throughout the RPM range and can often help an erratic surging idle.

The optional Radium 20-0176 fuel pulse damper can be used in any of the three -8AN ORB ports on the Subaru fuel rails.

Want to reuse the OEM Subaru FPR?

If the OEM 2-bolt flanged FPR will be reused, select one of the OEM FPR options above. The 20-0301 OEM FPR adapter is commonly used with EJ20 engines and 20-0303 is used with EJ25 engines (excluding STi). MEASURE YOUR OEM FPR BEFORE ORDERING. These adapters can be used in any of the ports and permits properly clocking for appropriate fitment.

Depending on the vehicle's country of origin, this fuel rail kit is compatible with the following Subaru models:

  • 2002-2014 Impreza WRX (that came with top feed injectors)
  • 2007-2018 Impreza STi (that came with top feed injectors) 
  • 2007-2012 Legacy GT (that came with top feed injectors)
  • 2007-2012 Outback XT (that came with top feed injectors)
  • 2006-2013 Forester XT (that came with top feed injectors)
  • 2005-2006 Saab 9-2X Aero (that came with top feed injectors)


warning_symbolWARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.

Weight
5.00 lbs
Write Your Own Review
You're reviewing:Radium Top Feed Fuel Rail Upgrade Kit (Subaru)
Need Help with this product?

Chat with our staff using our Live Chat, Call us at 303.402.5142 or Email us at

support@flatironstuning.com
Fast Shipping

Products ship within 2 days.

Easy Returns

Friendly return policy because our priority is making sure you have the right product.

Safe and Secure Shopping
Copyright © 2018 Flatirons Tuning LLC. All rights reserved.