Patented Interlock system & Polyurethane Design
The PERRIN Performance engine mount kit featuring Energy Suspension mounts with a patented Interlock design. Unlike OEM and Group N mounts, the unique shape of Energy Suspension's steel internals keep the mount from physically tearing apart. Small oil leaks, or highly corrosive atmospheric conditions combined with extreme temperature changes will make OEM and Group N rubber mounts brittle and lead to failure. The PERRIN Performance engine mount kit with Energy Suspension mounts features 75A durometer polyurethane that is impervious to oils and other chemicals, easily outlasting the OEM mounts.
The PERRIN engine mount kit includes upper engine mounts and lower mounting brackets with heat shields. Most replacement mounts reuse the heavy OEM steel bracket, but PERRIN mounts are CNC'ed 6061-T6 aluminum brackets, making a stronger mounting surface for the stiff urethane mounts. The PERRIN engine mount kit is ideal for those with OEM plastic type mounts as you will not need to buy additional parts to replace faulty or cracked plastic brackets.
Added Driver Feel
PERRIN engine mount kits are stiffer than stock, which adds some NVH (noise, vibration, harshness). The polyurethane compound provides enough vibration absorption for daily driving, yet strong enough to enhance driver perception with the added feeling of your engine solidly connected to the chassis, versus having that sloppy disconnected feel.
Easier to Remove Engine
OEM and aftermarket mounts use a stud and nut to secure the engine to the chassis. Making removing and installing the engine into the car somewhat tricky. The PERRIN Mounts use a bolt in place of the stud which means you do not have to lift the engine up past the studs, or get the mounts perfectly aligned to the transmission and subframe when installing the engine. This small detail was done specifically for the customer who is constantly pulling the engine out to add new part, rebuild, change clutch or any other big engine upgrade. Another PERRIN advantage!
This part installation is for the advanced DIY'er. Without specialized equipment in your home garage, we recommend having a professional shop perform the install. Please note the 5 wrench installation rating and please download and read the instructions before deciding to install these mounts yourself.
- (1) PERRIN Motor Mount, Left
- (1) PERRIN Motor Mount, Right
- (2) Grade 8 hex head bolts
- (2) Extra thicc SAE flat washers
- (2) Spacers
- (1) Anti-Seize Grease Packet
- Warranty, instructions, stickers
**Special care must be taken when installing PERRIN Engine Mounts with an aftermarket header. Wrapping and/or additional head shielding on the header is required to keep heat away from the PERRIN Engine Mount.
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.