Nameless Performance Midpipe - 3.0" (BRZ & FRS)

Continuing on with our full 3" exhaust system for the 2013-2016 BRZ / 86 / FR-S, we have our mandrel bent, TIG welded, T304 Stainless midpipe. Similar in design to our '08+ STi midpipe with some changes in geometry, this design is well proven and a great way to get the extra horsepower out of your big N/A build or your Forced Induction 86.

Weight
15.00 lbs
SKU
BRZMP
Weight
15.00 lbs
$479.00

Continuing on with our full 3" exhaust system for the 2013-2016 BRZ/86/FR-S, we have our mandrel bent, TIG welded, T304 Stainless midpipe. Similar in design to our '08+ STi midpipe with some changes in geometry, this design is well proven and a great way to get the extra horsepower out of your big N/A build or your Forced Induction 86.

Also similar to our STi midpipe designs, the BRZ 3" midpipe features an aft-located 3" inner wound, outer braided, flexible coupler to ensure proper flange angle to allow the Axle Back portion of the exhaust hang appropriately and allow proper adjustment of the tip position. The midpipe also features a 4" diameter straight through resonator with 3" perforated core to smooth out the exhaust rasp. Replacing the factory single piece midpipe with this two section 3" midpipe also requires an additional flange in the middle of the midpipe - we use our proprietary latch-over v-band clamp and flange design for ease of installation, which also gives you the ability to clock the forward section of the exhaust for optimal clearance.

In turbocharged configurations, this part should bump torque up by roughly 20ft lb depending on turbocharger, and we routinely see increases in the 12whp range over a stock midpipe. The midpipe is equipped with a 3" donut gasket and flared front flange to allow the system to bold up easily to either a factory downpipe/front pipe or to an upgraded 3" overpipe/downpipe combination.

Fully compatible with factory driveshaft as well as one piece carbon fiber driveshafts. Available with or without a urethane exhaust hanger bushing for the single hanger near the differential.



warning_symbolWARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.

Weight
15.00 lbs
Write Your Own Review
You're reviewing:Nameless Performance Midpipe - 3.0" (BRZ & FRS)
Need Help with this product?

Chat with our staff using our Live Chat, Call us at 303.402.5142 or Email us at

support@flatironstuning.com
Fast Shipping

Products ship within 2 days.

Easy Returns

Friendly return policy because our priority is making sure you have the right product.

Safe and Secure Shopping
Copyright © 2019 Flatirons Tuning LLC. All rights reserved.
click here