Nameless Performance Dual Exit Axle Back Exhaust (13+ BRZ)

Here it is, the Axleback for the 2013-2016 Subaru BRZ/Scion FR-S. These use dual 4" tips that fit the bumper nicely unlike the other exhausts out there with cartoon sized tips.

The Nameless axleback has a 2.5" or 3.0" inlet which is larger than stock but not too large. Both split the main circuit to two 2" pipes. Both 2" circuits terminate in 4" diameter tips that sit flush with the bumper. This makes the car look like it should have from the factory.

The 3" inlet is intended for those looking to build a max hp N/A build, or going with some kind of forced induction. The 2.5" inlet is intended for the majority of people looking to keep the car N/A, and has a slightly quieter output than the 3"

2x Nameless Performance Points Bonus

Weight
29.00 lbs
SKU
SUAB13BRZ-
Weight
29.00 lbs
Our Price: $529.00

Here it is, the Axle Back for the Subaru BRZ/Scion FR-S. These use dual 4" tips that fit the bumper nicely unlike the other exhausts out there with cartoon sized tips.

The Nameless Axle Back has a 2.5" or 3.0" inlet which is larger than stock but not too large. Both split the main circuit to two 2" pipes. Both 2" circuits terminate in 4" diameter tips that sit flush with the bumper. This makes the car look like it should have from the factory.

The 3" inlet is intended for those looking to build a max hp N/A build, or going with some kind of forced induction. The 2.5" inlet is intended for the majority of people looking to keep the car N/A, and has a slightly quieter output than the 3"

 

Performance

  • The weight of our Axle Back is 17 pounds compared to the 25 pound stock muffler
  • The Axle Back produces almost no peak HP but fills in the valley that is typical of this new direct injected boxer 4

 

Muffler Options

  • No Mufflers
    This is also known as a Muffler Delete. This is louder than the other two options for obvious reasons, but still sounds good. In cabin noise is greater than that of the muffled options as well. This option is good if you want the "race car" sound with out the unfinished "race car" look and you are not planning on upgrading other portions of your exhaust. A Caveat here, if you are sensitive to noise or don't like loud exhaust, this option is not for you
  • 5" Mufflers
    The dimensions of these hand built mufflers are 5" diameter with a body length of 8" and offset inlet/outlet. These mufflers are the best option for a nice smooth exhaust note. The tone is nice and deep with volume being mellow with stock exhaust otherwise. When you decide to upgrade to an aftermarket downpipe or overpipe/downpipe combo, this exhaust really comes alive while remaining deep and smooth sounding. This Axle Back even keeps the volume down at a tolerable level with our catless header

 

Vehicle Fitment

  • 2013+ Subaru BRZ

 


warning_symbolWARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.

Weight
29.00 lbs
Need Help with this product?

Chat with our staff using our Live Chat, Call us at 303.402.5142 or Email us at

flatironstuning@flatironsimports.com
Fast Shipping

Products ship within 2 days.

Easy Returns

Friendly return policy because our priority is making sure you have the right product.

Safe and Secure Shopping
Copyright © 2019 Flatirons Tuning LLC. All rights reserved.
click here