Nameless Performance Catback Exhaust - 3" (13+ BRZ)

Here it is, the 3" catback for the 2013-2016 Subaru BRZ/Scion FR-S. This package includes our Dual Exit 3" Axleback w/ 5" Mufflers and our 3" mandrel bent midpipe with resonator. Bundling these this way saves significantly on shipping. This bundle includes a 3" Donut Gasket to make the proper connection to the front pipe.

This catback is intended for people who have forced induction planned for their car

Specs
Our axleback has a 3" inlet which is larger than stock but not too large. The 3" main circuit then splits to two 2" pipes. Both 2" circuits terminate in 4" diameter tips that sit flush with the bumper. This makes the car look like it should have from the factory.

The weight of our axleback is 17 pounds compared to the 25 pound stock muffler.

The axleback produces almost no peak HP but fills in the valley that is typical of this new direct injected boxer 4.

SKU
Nameless 3" Catback Exhaust (13+ BRZ)
$999.00

 

Each time we tell people the name of our business, we have to explain why we chose to call ourselves Nameless Performance. It's quite simple really – it exemplifies our business model and our sense of humor. As eBay and the internet provide a flood of overseas products into enthusiast hands, paired with little to no customer service, customer involvement or qualification, it became evident to us that a radical alternative was necessary. As enthusiasts of pretty much everything mechanical, we have had very few experiences with manufacturers that were as personal and connected as we would prefer. So we decided to make that company a reality. When discussing what to call this company, it was evident that using our names or some pairing of hyperbole and motorsports catch phrases was not going to convey anything about us or our customers or why we do what we do. So why not put out a name that begs a question.

Here it is, the 3" catback for the 2013-2016 Subaru BRZ/Scion FR-S. This package includes our Dual Exit 3" Axleback w/ 5" Mufflers and our 3" mandrel bent midpipe with resonator. Bundling these this way saves significantly on shipping. This bundle includes a 3" Donut Gasket to make the proper connection to the front pipe.

This catback is intended for people who have forced induction planned for their car

 

Specs
Our axleback has a 3" inlet which is larger than stock but not too large. The 3" main circuit then splits to two 2" pipes. Both 2" circuits terminate in 4" diameter tips that sit flush with the bumper. This makes the car look like it should have from the factory.

The weight of our axleback is 17 pounds compared to the 25 pound stock muffler.

The axleback produces almost no peak HP but fills in the valley that is typical of this new direct injected boxer 4.

 

Muffler Options

  • No Mufflers
    This is also known as a Muffler Delete. This is louder than the other two options for obvious reasons, but still sounds good. In-cabin noise is greater than that of the muffled options as well. This option is good if you want the "race car" sound with out the unfinished "race car" look and you are not planning on upgrading other portions of your exhaust. A Caveat here, if you are sensitive to noise or don't like loud exhaust, this option is not for you.

  • 5" Mufflers
    The dimensions of these hand built mufflers are 5" diameter with a body length of 8" and offset inlet/outlet. These mufflers are the best option for a nice smooth exhaust note. The tone is nice and deep with volume being mellow with stock exhaust otherwise. When you decide to upgrade to an aftermarket downpipe or overpipe/downpipe combo, this exhaust really comes alive while remaining deep and smooth sounding. This axleback even keeps the volume down at a tolerable level with our catless header.

 

Vehicle Fitment

  • 2013+ Subaru BRZ

warning_symbolWARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.

More Information
SKU Nameless 3" Catback Exhaust (13+ BRZ)
Product Type Intake and Exhaust
Intake and Exhaust Exhaust
Brand Nameless Performance
Need Help with this product?

Chat with our staff using our Live Chat, Call us at 303.402.5142 or Email us at

flatironstuning@flatironsimports.com
Fast Shipping

Products ship within 2 days.

Easy Returns

Friendly return policy because our priority is making sure you have the right product.

Safe and Secure Shopping
click here