Motul 5L Synthetic Engine Oil 8100 0W20 ECO-LITE, 1L & 5L - 0W20

Recommandations : HONDA Europe gasoline enginesMAZDA gasoline engines
SUBARU SOHC (single overhead camshaft) engines

These oils may be unsuitable for use in some engines. Refer to the owner manual or handbook if in doubt.


Weight
5.00 lbs
SKU
108
Weight
5.00 lbs
Our Price: Special Price $38.91 Our Price: Regular Price $43.23

Motul 5L Synthetic Engine Oil 8100 0W20 ECO-LITE

100% synthetic

PERFORMANCES
Standards : API SM / CF
Recommandations : HONDA Europe gasoline enginesMAZDA gasoline engines
SUBARU SOHC (single overhead camshaft) engines
The new API SM standard is fully backward compatible over API SL requirements and all former API standards.
API SM lubricants provide outstanding oxidation resistance, better anti-deposits protection, better engine cleanliness, anti-wear protection and enhanced performance at cold temperature during the whole oil life span.
Viscosity grade SAE 0W-20 minimises oil hydrodynamic friction, allows fuel economy especially when oil is cold.
Improves oil flow at start up, faster oil pressure build up, faster rev raisings and reach operating temperature faster.
Environment friendly, this type of oil allows fuel consumption reduction and therefore minimises green house gases (CO2) emissions.


RECOMMENDATIONS
Drain interval : refer to manufacturers recommendations and tune to your own use.
Can be mixed with synthetic or mineral oils.
PROPERTIES
Viscosity grade    SAE J 300    0W-20
Density at 20°C (68°F)    ASTM D1298    0.838
Viscosity at 40°C (104°F)    ASTM D445    48.6 mm²/s
Viscosity at 100°C (212°F)    ASTM D445    8.8 mm²/s
HTHS viscosity at 150°C (302°F)    ASTM D4741    2.69 mPa.s
Viscosity index    ASTM D2270    162
Pour point    ASTM D97    < -50°C / < -58°F
Flash point    ASTM D92    238°C / 460.4°F
Sulfated ash    ASTM D874    0.07% weight
TBN    ASTM D2896    8.4 mg KOH/g

TYPE OF USE
"Fuel economy" engine oil specially designed for recent cars, powered with gasoline engines, designed to use oil with low friction, very low HTHS viscosity (¥ 2.60 mPa.s) and "Mid SAPS" reduced content of sulfated ash (0.8%), phosphorus (0.09%) and sulphur (0.3%).
Catalytic converter friendly.


These oils may be unsuitable for use in some engines. Refer to the owner manual or handbook if in doubt.


warning_symbolWARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.

Weight
5.00 lbs
Need Help with this product?

Chat with our staff using our Live Chat, Call us at 303.402.5142 or Email us at

flatironstuning@flatironsimports.com
Fast Shipping

Products ship within 2 days.

Easy Returns

Friendly return policy because our priority is making sure you have the right product.

Safe and Secure Shopping
Copyright © 2019 Flatirons Tuning LLC. All rights reserved.
click here