H&R 12x1.25 Wheel Stud, Set of 20 - 45mm (Subaru Application)
H&R offers a large selection of specialty wheel tightening bolts and lug nuts, available with a multitude of thread sizes and seat types. Lug nuts and bolts may be used as replacement parts or with other H&R products. It's always a good idea to have a couple extras on hand.
German Made Extended Wheel Studs, these are a 45mm length, which is about 12mm longer than the OEM Subaru Studs.
- 12 X 1.25
- Knurl Diameter 14.25mm
Safety guidelines(Minimum number of turns for wheel bolts/nuts):
- M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
- M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
- M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
- M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length
- M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
- 1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length
Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm -- i. E. Rear Axle Mercedes).
NOTE: This price is for a set of twenty wheel studs!
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.
Need Help with this product?
Chat with our staff using our Live Chat, Call us at 303.402.5142 or Email us email@example.com
Products ship within 2 days.
Friendly return policy because our priority is making sure you have the right product.