AEM 3.5 Bar/50 PSI MAP Sensor Kit
This kit includes the 3.5 BAR/50 PSIa Stainless Steel Sensor, Connector, Pins, 1/8" NPT to -4 Adapter, and 1/8" NPT to 3/16" Barb Adapter. This kit is perfect if you are changing your car to run speed density tuning.
Sensor Performance Specifications:
- +/- 1% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity
- Operating Temp:
- -40C to 105C / -40F to 221F
- Burst Pressure:
- Response Time:
- Less than 1mS
- Wetted Materials:
- 304L & 316L Stainless Steel
- 100 to 2000Hz, 20g Sinusoidal, 3 Axes
- Less than 85g
- Supply Current:
- Less than 6mA at 5 Vdc
- .5 to 4.5Vdc Linear
- Transfer Function:
- PSI = (12.5*(Voltage))-20.95
- Elec. Termination:
- Integral weatherproof connector, includes mating connector & pins (Supply Voltage 5Vdc +/- .5, Ground, Output)
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.
Need Help with this product?
Chat with our staff using our Live Chat, Call us at 303.402.5142 or Email us email@example.com
Products ship within 2 days.
Friendly return policy because our priority is making sure you have the right product.