NOW AVAILABLE - GEN2 GTX3071R stock location, externally gated, and bolt-on for the Subaru WRX / STI. ** Package Includes TiAL MV-R Wastegate (& all wastegate springs) and dump tube. **
Just like the Garrett GEN2 GTX3071R kit ATP-SUB-082, but with built in flange for a TiAL 44mm wastegate (Included) on the turbine housing. High flow, less exhaust backpressure, more precise boost control, even more power!
Garrett GEN2 GTX3071R dual ball bearing turbocharger. Advanced GEN2 billet compressor wheel capable of 650HP!
The Garrett GEN2 GTX3071R fits turbine housings for Garrett GT30 (standard size) and GTX30 series turbochargers with a 60mm inducer and 84 trim turbine wheel.
- Advanced aerodynamics & ultra high flow Garrett GTX GEN2 compressor wheel
- Forged billet aluminum compressor wheel
- Dual ball bearing CHRA rotating assembly
- Compressor Wheel Inducer: 54mm
- Compressor Wheel Exducer: 71mm
- Compressor Wheel Trim: 58
- Compressor Housing A/R: 0.60
- Turbine Wheel Inducer: 60mm
- Turbine Wheel Exducer: 55mm
- Turbine Wheel Trim: 84
- EJ20 and EJ25 (stock open scroll flange and location) platform compatible
- Twin-scroll up-pipe flange, NOT compatible
- 2008 to 2014 WRX (DOES NOT apply to STI model) requires either (A) aftermarket top mount intercooler with a hose connection to the compressor outlet; or (B) a front mount intercooler
- 2015+ WRX STI (equipped with EJ25 engine) compatible
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.