MAP DCCD Center Differential Controller

MapDCCD allows you to freely chose maps for road, wet track, dry track, autocross, rally, drag racing or fuel economy. Your maps can also be loaded from saved maps on your computer or from our selection of base maps that come bundled with the application. Any of the four loaded maps can be selected on the fly - allowing you to select the most appropriate map for your driving conditions.

FEATURES

  • An affordable DCCD controller that you can easily program yourself
  • An advanced centre differential control system without the price tag associated with some name brands
  • The only DCCD controller that allows you to connect and tune using a plug-and-play USB interface - no serial cables or extra hardware is required
  • Four freely configurable DCCD control maps that can be stored simultaneously
  • Front dial controlled advanced automatic mode (based on the OEM STI auto mode), which provides control of the aggression settings - no mapping required
  • A Manual mode where you can set the DCCD lock via the front dial on interface
  • Free firmware updates with improvements and new features
  • The ability for the controller to act independantly or integrate with an existing DCCD controller that has a manual mode (e. G. the GC8 controller to retain the dashboard display)
  • Live output and mode display on the controller
  • Built in precision 3-axis accelerometer you can use in your maps
  • Data logging output
  • Input for integrating your own external sensors into your control maps
  • e. G. gyros, accelerometers, steering wheel angle sensors, an external ecu input, an STI thumbwheel input, separate throttle and braking control maps, a handbrake input, an ABS input ... and more

Please note that all MAP DCCD controllers purchased from 2016 on are the Version 2.

If you want to install this on an STI, you will most likely lose your ABS and traction control.  If you remove the factory DCCD control, since it is on a CAN bus, you will lose the function of other related systems on the network.  For that reason, we only recommend using this conrroller when swapping an STI transmission into another chassis, or for race use when traction control and ABS are not needed.

$415.00
SKU
MAP-DCCD

 

MapDCCD is the world leading differential control system for motorsport and street use.

Compatible with Subaru DCCD, Nissan ETS ATESSA and Mitsibishi ACD center differentials.

 

Download the Installation and Setup Guide

Download the MapDCCD Software v2.80

For more information contact us!

Here is why we like the MAP DCCD controller more than any other option on the market:

Smeedia just put together a very good and comprehensive install video on this controller, so check that out if you would like to see a step by step guide to installing this controller:



WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to https://www.P65Warnings.ca.gov/passenger-vehicle.

More Information
SKU MAP-DCCD
Brand MAP DCCD
Product Type Engine
Engine Electronics and Sensors
We found other products you might like!