WE ARE NOW OFFERING FREE SHIPPING ON ALL WHITELINE PRODUCTS!!!!!!!!
All Whiteline Sway-Bars are constructed of solid high-grade steel, and most of Whiteline Sway-Bars are available in either 2-way or 3-way adjustable versions.
A 3-way adjustable bar is rated at its neutral setting, which is the middle hole on the bar. If you mount the endlinks to the bar using the soft setting (making the lever arm longest, or the furthest hole away from the sway-bar mounts), this will reduce it’s effective diameter by approximately 1mm. Mounting the endlinks in the stiff setting (with the shortest lever arm) will increase the bars effective diameter by aproximtely 1mm.
So a 3-way adjustable 22mm bar can be set to be either 21mm, 22mm, or 23mm.
A 2-Way adjustable bar is rated at its neutral setting which is actually in-between the two mounting holes on the bar. The softer setting will actually decrease the bars effective diameter by approximately .5mm, where as the still setting will increase the bars effective diameter by approximately .5mm.
So a 2-way adjustable 20mm bar can be set to either 19.5mm, or 20.5mm.
Integra and Integra Type-R ( DC4) Front Sway-Bar:
BHF53Z - 24mm 2-way adjustable
BHF53XZ - 27mm 2-way adjustable
Integra Rear Sway-Bar:
BHR36Z - 20mm 2-way adjustable*
BHR36XZ - 22mm 2-way asjustable
Integra Type-R Rear Sway-Bar:
BHR72Z - 24mm 2-way adjustable
* = special order only, not a stocked item.
Please check the "Large Image" chart to make sure that you are getting the correct sway-bar for your desired application.
We do try to keep all of these bars in stock, but please feel free to call and check availability before ordering.
Integra (DC2) Front Sway Bar -- 27mm
Integra (DC2) Rear Sway-Bar 22mm
Integra (DC2) Rear Sway-Bar 20mm
Integra Type-R (DC2) Rear Sway-Bar 24mm