New Go Fast Bits G-Force Electronic Boost Controller!

GFB introduces the Powerful, Easy to Use and Unbeatable Value G-Force Electronic Boost Controller. 

It features: 
Controls Boost Pressures up to 50 PSI
Scramble Boost with remote trigger (program a timed boost increase for that extra edge when needed)
Spike-Stop feature eliminates boost spike
Open or Closed loop operation (closed lo...

(read more...)

GFB puts the key to boost control in YOUR hands! 

All turbocharged vehicles utilize some form of factory boost control, most of which display a tendency to be conservative in allowing the boost to build up, and then taper away noticeably toward redline. A GFB Boost Controller however, not only allows quick and easy boost level adjustment, but i...

(read more...)

This is the Top Mount Intercooler that comes on the JDM STI Version 8.  It does look identical to the USDM intercooler, however this one will bolt up as an exact replacement for your WRX intercooler, where the USDM will not. 

(read more...)

This kit consists of all the vacuum lines, clips, and connectors that run from the compressor side of the turbo, to the waste-gate actuator, and to the factory boost control solenoid.  The OEM restrictor pill is all ready installed as well, and is in the line with the gold dot which goes to the compressor.

(read more...)

The Turbosmart E-Boost 2 is more than just a boost controller, e-Boost2 puts you in total control of your turbocharger.

With a host of features and state-of-the-art software, e-Boost2 is the one accessory all owners of turbocharged cars should have! Easy to use, yet technologically advanced, e-Boost2 is equally at home in a street-going vehicle as it is in a top-level race car. 

The E-Boost 2 give...

(read more...)

The Turbosmart E-Boost Electronic Boost Controller is a brand new electronic boost controller aimed at the street performance market. It features many boost control capabilities found on its big brother – the e-Boost2, continuing the e-Boost tradition of providing class leading boost control, value for money and no nonsense features.

Features
(read more...)

MURRAY Constant Tension CLAMPS

A constant tension stainless steel worm gear clamp designed to compensate for the effects of thermal cycling and/or compression set of hose. The Murray Clamps' spring action outer-band solves this problem and features a unique innerband profile to provide superior sealing pressure via its two raised ribs and the chamfered edges eliminate damage to the hose when tightened.

Please Note:

T...

(read more...)

Why use Silicone Hoses?

Silicone hoses are stronger, tougher and more flexible than ordinary rubber hoses.
Turbosmart Silicone Hoses are manufactured from a high-grade silicone and offer superior temperature resistance which makes them ideal for cooling/heating and charged-air applications. They will last longer, perform better and will not deform under extreme conditions. An inexpensive and practical performance modification for ...

(read more...)

Why use Silicone Hoses?

Silicone hoses are stronger, tougher and more flexible than ordinary rubber hoses.
Turbosmart Silicone Hoses are manufactured from a high-grade silicone and offer superior temperature resistance which makes them ideal for cooling/heating and charged-air applications. They will last longer, perform better and will not deform under extreme conditions. An inexpensive and practical performance modification for all types of ...

(read more...)

Why use Silicone Hoses?

Silicone hoses are stronger, tougher and more flexible than ordinary rubber hoses.
Turbosmart Silicone Hoses are manufactured from a high-grade silicone and offer superior temperature resistance which makes them ideal for cooling/heating and charged-air applications. They will last longer, perform better and will not deform under extreme conditions. An inexpensive and practical performance modification for all types of ...

(read more...)

Why use Silicone Hoses?

Silicone hoses are stronger, tougher and more flexible than ordinary rubber hoses.
Turbosmart Silicone Hoses are manufactured from a high-grade silicone and offer superior temperature resistance which makes them ideal for cooling/heating and charged-air applications. They will last longer, perform better and will not deform under extreme conditions. An inexpensive and practical performance modification for ...

(read more...)

By far the easiest and most cost-effective way of controlling the amount of pressure going to the wastegate is via a Gated Boost Control Valve. All Turbosmart Gated Boost Controllers are manufactured from high-grade brass and aluminium and are renowned for their easy installation, operation and stability. The extensive range covers all applications; from mild street-tuned engines, to purpose-built race power plants.

...

(read more...)

Subaru Performance Tuning has put together this gauge kit to tell you your Boost Pressure, Oil Temperature, and Voltage.  It mounts where the OEM clock sits, and comes with all necessary mounting hardware, and instructions.  This is perfect if you would like a little...

(read more...)

More air entering the engine can increase combustion efficiency, resulting in more horsepower and acceleration.  K&N designs their filters to reduce air restriction allowing your engine to breathe more air.  They are also reusable so they should last the life of ...

(read more...)

This Walbro Fuel pump is a direct replacement for your factory fuel pump, and comes with all the required parts for installation and instructions.  It flows 255Liters per Hour, which is much more than the OEM pump, and is a essential if you are running larger injectors to maintain consistent fuel pressure.
(read more...)

This is the OEM bracket that holds on the OEM, and most aftermarket Heat Shields.  Because it is so small, it is easy to loose during an install, and some people just leave it off when installing a Downpipe. 

(read more...)