GTSPEC's 3-piece subframe reinforcement brace. They are constructed of 6061/6063 vacuumed out aluminum with hollow triple wall design that is used in all GTSPEC suspension products. The result is incredible rigidity and a total weight saving of 6 kg/13.25 lb. This is a 3 piece set, including one front piece and two side pieces.

May require minor modification to fit to Forester XT.

GTSPEC Part # --- GTS-SUS-1092

Quantity:   

This four point undercarriage brace reinforcing the connection between the control arms and chassis, improves road handling and structural integrity.

Will also fit 2004-2008 Subaru Forester XT

GTSPEC Part # ---- GTS-SUS-1046

Quantity:   

Improve handling response. GTSPEC CNC's this piece from a aircraft grade 7075 aluminum. This is stronger than most anti lift kits in the market. They utilize rubber bushings in their Anti-Lift Kit that is 30% stiffer than stock. This gives you the advantage of the Anti-Lift Kit, but without the extra noise and lack of comfort.

GTSPEC's install...

(read more...)

Quantity:   

GTSPEC's front lower tie brace for 02-07 WRX and STi. Replaces stock jacking plate with CNC cut center piece. Ties front left and right control arm to the center jacking plate. Will work with GTSPEC 3-piece subframe brace and 4-point ladder braces. May not work with all 06-07 WRX and STI's, your jacking plate needs to be removable.

GTSPEC Part # --- GTS-SUS-1133

Quantity:   

GTSPEC's strut bar comes with triple internal hollow wall structure for stronger support. The actual bar is made of aluminum with high polish. Constructed by air craft 6061 grade aluminum for rigidity and strength.

GTSPEC Part # ---- GTS-SUS-1330

Quantity:   

GTSPEC front strut bar for the 2002 - 2007 Subaru WRX and STi. Hollow internal structure for stronger support.

Will also fit 2004-2008 Subaru Forester XT.

 Fits 06+ STi with slight a/c line tweak. Picture taken with brace installed on a 2006 STi

GTSPEC Part # --- GTS-SUS-1170

Quantity:   

Quantity:   

Pillowball upper mounts are designed to offer greater feed back by eliminating the deflection in OEM rubber bushings. A NWB spherical bearing is used in place of the rubber bushing, which allows for improved tire grip and more accurate wheel alignment. In vehicles with front strut type suspension, an adjustable camber plate is incorporated into the upper mount. Degrees of adjustment will range depending on application.

Additional F...

(read more...)

Quantity:   

Quantity:   

Quantity:   

Quantity:   

Subaru Technica International has designed this replacement for the OEM Trailing Arms.  This kit replaces all the original rubber bushings with pillow ball (spherical) joints allowing for smooth and accurate movement of the suspension.  They are also substantially stiffer, so your rear suspension is able to work more efficiently due to less deflection under hard cornering and bumps.
 

When matched with the STi Lateral L...

(read more...)

Quantity:   

Quantity:   

Quantity:   

Quantity:   Size 20mm Bar 22mm Bar 24mm Bar  

Quantity: